Ubuntu安装STLINK

Installing STLINK

STLINK is open source software to program and debug ST’s STM32 Discovery kits. Those kits have an onboard chip that translates USB commands sent by the host PC into JTAG/SWD commands. This chip is called STLINK, (yes, isn’t that confusing? suggest a better name!) and comes in 2 versions (STLINK v1 and v2). From a software point of view, those versions differ only in the transport layer used to communicate (v1 uses SCSI passthru commands, while v2 uses raw USB). From a user point of view, they are identical.

Before continuing, the following dependencies must be met:

• 1.libusb-1.0
• 1.1：sudo apt-get install libusb-dev
• 1.2：sudo apt-get install libusb-1.0-0-dev
• 2.cmake
• 2.1：sudo add-apt-repository ppa:george-edison55/cmake-3.x
• 2.2：sudo apt-get update
• 2.3：sudo apt-get install cmake

STLINK should run on any system meeting the above constraints.

The STLINK software source code is retrieved using:

    $>:3：git clone https://github.com/texane/stlink.git

Everything can be built from the top directory:

    $> 4：cd stlink

    $: 5：make

    $> 6：cd build/Release && make install DESTDIR=_install

    7：将st-flash复制到/usr/bin下就可使用sudo st-flash write test.bin 0x8000000下载程序了

    It includes:

• a communication library (libstlink.a),
  • a GDB server (st-util),
  • a flash manipulation tool (st-flash).
  • a programmer and chip information tool (st-info)